So it has been over a year since my last post. Early last year I decided to embark on car sales. This goal took me away from aviation for quite a while, as all my aircraft remained in the hangar. With a determined goal in mind, I set out to do something that was not just another assembled car, but something that took the best of all available components and pull them together with my own touch to make something that stood out. Perhaps more on that in another article on why it took so long and why I was determined not to release anything until I could stand behind it with pride. Now, having accomplished that with three cars, plus one that has an available emergency services edition, I can happily say I met my goal.
So now the time has come to dust off the site and get back into the (second) world again. With that in mind and fingers at the keyboard, lets get started!
Modifiable Content Update
The last article published was about progress that has been made in SecondLife® with regard to modifiable content (specifically planes, trains, boats and cars). I am very happy to say that this has been phenomenal! From what I can see, there is only one major player left in civilian aircraft manufacturing that has not (and most likely will not) allow their customers to customize their planes as desired. Thanks to many open minded builders, there is now at least one or more more airplanes available in every class of civilian aviation craft, from small two seat planes to jumbos like the 757, and almost every imaginable type of helicopter, that are modifiable and superior quality aircraft. Modifiable is now the standard rather than the exception.
Watercraft still have a few holdouts, but really the boat makers caught on early because of the demand to be able to apply custom names and paints. My first Trudeau was modifiable back in 2007.
Ground vehicles lagged behind a bit because the two dominant builders held out for a long time. But the crack in that dam started with pressure to make one particular trailer modifiable, along with pressure from the vast number of cars being cranked out with ACS scripts being release modifiable. As of now, only one of what I would call the “major players” in the car world has clung to the no modify flag with a passion. The dam has burst. So like with planes, you can now purchase just about any class of car with some expectation of high quality, and have it modifiable to fit your needs.
One subclass of ground vehicles, specifically fire trucks, is still is dominated by no-modify. But a new entrant into that subclass that has started with a pretty respectable modifiable alternative, may soon give them a run for their lindens.
With apologies to some I probably missed, below are a few recent modifiable aircraft releases from the major players. Most likely I’ll take one of these for a review soon.
We are in a world temporarily gone mad. The light is at the end of the tunnel and it is NOT an oncoming train! Stay safe my friends. SecondLife® is a great salvation from the real world need for social distancing. Its OK to dance here. I hope you dance!
While there will always be a few stubborn holdouts, it appears that for boating and aviation, the battle for modifiable content has been essentially won. There are a couple of remaining creators that cling to leaving that Modify checkbox empty. But virtually all new entries into the market being pro-modify. And most legacy creators have been updating their mesh models to modify. The remaining creators will soon fade into irrelevance over a short time. For me, as far as aircraft and boats are concerned, victory can be declared.
The remaining battleground now is on ground vehicles. Until recently, the hope for cars from the major creators becoming modifiable looked dismal. While there are many modifiable ground vehicles available, until recently virtually all of them used the antiquated and apparently no longer supported ACS scripts. Most (not all) of these cars suffer from poor performance such as turning in place and difficulty to control. This is not so much due to the scripts themselves, but due to creators not effectively tuning the vehicle for proper performance.
But there is now a light at the end of the tunnel. As with boats and aircraft, it just took one of the major creator in ground vehicle manufacture to begin the move, along with a new creator in the market starting out with modify enabled. Prompted mostly by GTFO and continued market pressure, there are now several options for modifiable ground vehicles. Hopefully more will follow with new creators joining the market as well as more legacy creators accepting the fact that their creations will not self destruct in a great ball of fire if they go modify.
Below is a list of the recent releases that I am aware of for modifiable ground vehicles. I am sure more exist and will update this list as they are provided. Please note two things:
Only creators that are using proprietary scripts will be included.
This is not an endorsement of quality of the vehicle. Some of these I have not evaluated.
* The Wolf Tactics Wrecker is not a new release but it otherwise meets the criteria for this list, so it is listed for honorable mention.
This may not be a comprehensive list. Please feel free to comment with information about other vehicles that are modifiable, use proprietary scripts and have quality LOD and builds worthy of mention. Going forward this list will be limited to three vehicles per creator as I hope we will see many more options for modifiable vehicles. Also, please remember that scripts are usually never modifiable and with good reason. So modify only applies to the build itself.
Note About ACS Scripts
Again I do acknowledge that there are many creators out there making cars with ACS scripts. Some may be fairly well done. But the reality of ACS is its latest version has been considered a “beta” since 2014 and therefore it should be viewed as unsupported.
If someone has an ACS based vehicle that they are determined is of the quality that meets the par of the above creators I would be happy to give it a test ride and consider a review.
What Makes A Vehicle High Quality?
Sadly, some SL limitations prevent any car or truck perfect in SL. For example, I have yet to find any car or truck in SL that is easy to get aligned to a straight road. The arrow control just does not seem to have the sensitivity for that. Further, region crossings seem to be much more painful on cars than they do on planes. That seems counter intuitive. But it seems to be an unfortunate reality. So some criteria are relative to what appears to be technically possible.
It will not turn left or right when it is not moving forward or backward. Way too many lower end cars do that in SL.
When moving forward, it will turn realistically. Not either take an entire road to turn, or turn at a sudden 90 degree move.
Realistic engine sounds.
It will remain solid when pulling back the camera view. So many cars in SL start seriously decomposing two mouse wheel clicks back from the default view.
Easy to control settings both through gestures and hud.
Quality UV mapping for easy painting, along with release of UV maps in PSD format.
Extra points: Retains miles traveled, adjustable steering sensitivity, reverse camera view when backing up, edit mode to make sure added prims don’t mess up the build.
Please don’t bother with “increase your LOD setting”. Nope. Not going to do it. There are plenty of vehicles that are built correctly using all four LOD model settings such that they do not turn into triangles at the first level of detail transition. So there should be no reason for customers to have to increase their lag to accommodate creators not making a proper mesh.
The presence of Lusch Motors and Jupiter AG on the above list marks special significance. As part of the NTBI Group, they are really the first of the major creators of cars and trucks to start moving toward modifiable content. While they have not released modifiable updates of their legacy vehicles still being marketed, perhaps as they begin to roll out improvements this will be considered. And with any luck the remaining NTBI Group members will follow suit.
Don’t underestimate the effort. It is easy to just flip on the modify flag. But these two creators took the extra step to add protective measures to help making added prims less likely to break the vehicles. This demonstrates a special care for a quality experience but it is an extra effort that shows great concern for customer satisfaction. That said, even if a creator is not willing to go through that, I’d prefer they all flip on the modify flag. But making this kind of effort to not only provide what most customers want and going to the extra effort to make it even easier is even more laudable.
A big shout out of thanks to Owen Lusch and Lyte Rae for taking this brave step. This is a win-win for these creators and the market.
If you are looking for quality built cars or trucks, please consider these creators. They have taken the steps to give the one thing that almost everyone in SL that uses moving vehicles has been shouting for over the years. Lets make sure to let them know their efforts are worthy of our rewards!
Until next time, blue skies, fair winds and safe roads!
The most recent release of the Firestorm viewer brings a new experimental feature for region crossings. Located in your preferences page at Move & View, Movement tab, is this new option, called Movement at Region Crossing:
As seen in the illustration, you have two choices:
Predict (classic behavior)
Stop (new behavior)
When Stop is selected, region crossing behavior changes from what we are used to. Instead of your client trying to predict the continued path of you or your vehicle (most often resulting in “rubber banding” back to the border once the hand off is complete), you actually will stop at the region crossing until the hand off is completed. While this usually brief pause can be a bit annoying, the theory is it is less impactful than the rather painful spin and sometimes very experience damaging rubber band effect.
This type of feature was coded directly into the Portland Trolley created Bibian and it worked quite well. So with this in mind, I chose three moving objects to test this feature:
ATX-72 Commercial Airplane
GEMC – Baiern Alpenjager Automobile
Bandit Destino Cabin Cruiser
ATX-72 Commercial Airplane
As most people that have used this plane are aware, the ATX-72 has a very strong rubber band effect with most region crossings under normal conditions. I made two attempts to fly this plane from White Star Airfield to Delchdork Airport using Stop mode. The good news is that for at least 25 crossings, this plane handled totally smooth. The normal very painful snap back that plagues the ATX-72 did not occur.
The bad news is that during both flights, I was unseated from the plane between Venrigalli and Wolsing, which is the west side of Cheerport Airfield. Since both incidents occurred at the same crossing, this might point to a region crossing. Given the time required to reach that point a third time, I chose not to repeat this test in Predict mode during the test. But more on the basic issue later.
GEMC – Baiern Alpenjager Automobile
This car was chosen for no particular reason. I have found that of the professional grade auto makers, all of them seem to have similar experience with region crossings. Which is to say, not so great. With this car, I started out at Smugglers Port and began a run through the roads of the Heterocera Atoll. Number of region crossings in this case I can’t even estimate.
The trip was about 1/2 hour. No issues were encountered other than a little wild driving. Region crossings were totally smooth excepting the expected delay with the Stop mode. Essentially, it was a successful test and I found the delay at each crossing to be less painful than the rubber banding that frequently throws me off course when driving.
Bandit Destino Cabin Cruiser
This is where things became interesting. I had just purchased the Destino, so decided this was a good test run for it. Like with virtually all Bandits I have sailed or motored, the Destino performs admirably at region crossings with very little rubber banding. A fine boat it is. I motored out from the southwest corner of Nautilus near Half Moon Bay Airport eastbound through the Bingo Strait and down into the Sailors Cove sims.
All region crossings were smooth using stop mode, until I got to the crossing from Mumford Cove to Fanci Deep SW. At this crossing, as with the ATX-72, I and my passenger were both unseated. Since Mumford Cove is an open rez area, I decided to try the crossing again. Same result. Third time, same result.
So next test was to rez the boat and change mode to Predict (classic behavior) and try the crossing again. In Predict mode, I managed to pass the crossing and stay seated. However, immediately upon entry, it was clear the region was not up to par. The boat was sluggish at best, difficult to control and non-constant in speed. Clearly the region was having issues (note: while typing this article I was hovering in the region and it went down, which also supports this theory).
After finishing with Fanci Deep SW, I motored up the Coastal Waterway toward White Star, in predict mode, with no issues.
Summing It All Up
The above results, summarized to me, show that while Stop mode will help considerably with objects that have consistently bad region crossings, it seems highly vulnerable to entries into poorly performing regions. To summarize:
Rubber banding of varying degrees depending on the craft being used.
Less chance of losing the trip on an unstable region.
Tolerate the guaranteed brief stop at each region crossing.
Less able to withstand a crossing into a poorly performing region.
What is your choice?
For me, the answer is that for craft that do not have a bad rubber banding effect to begin with, Predict is probably the better choice. Why solve a problem that does not exist?
For craft that are susceptible to heavy rubber banding effect, accept the risk that you may lose the trip if you hit a bad region and use Stop mode.
As with all things SL, your mileage may vary.
Happy flying, driving, railing, sailing or whatever!
On the secondary topic, wishing everyone a happy and prosperous 2018 in both worlds. It has been a great year and am wishing an even greater next year!
On the primary topic, this is a bit late to the party but as many know by now, a few popular legacy planes have now been released with modifiable air frames that were previously no-modify. And some of these planes are currently on sale too, though I suspect that sale may end today or tomorrow so if you’re interested, now is the time to buy!
I speculate that there are three motivations for the decision to release these planes modifiable:
Custom tail number registry from Kelly Shergood
Whatever the motivation, thanks VERY MUCH to Aeon Voom and Erick Gregan for recognizing the importance of modifiable content to the market. Here are the planes I know of that are now modifiable:
From Aeon Voom:
C130 (this was originally released modifiable)
From Erick Gregan:
ATX-72 (this was updated to modifiable last year)
Planes that were not originally designed to be modifiable may have some particular issues with adding and deleting prims. If the prim numbers inside the plane change, it could damage or break moving parts of planes. Above all, NEVER mess with the root prim! Virtually all moving parts on a plane depend on their local position relative to the root prim. Mess with that and you break it.
I have been told specifically that the Cessna 421 has this issue. I am not aware of the others. However, for adding prims, there is a tool designed to help with this which is intended to add new prims in such a way that the original prim numbers will not change. I have not tested it but have had some reports of it being successful. Here is the link:
Using this tool should allow new prims to be added without breaking things. It will not help with deleting prims. You can pretty much expect to break things if you delete prims if the object depends on prim numbers.
Another caution is that whenever adding prims, ALWAYS take the object back into inventory and re-rez it before doing ANYTHING including moving any of the parts (doors, flaps, etc.). This is true for all objects, even those with named prims. Even these, in the end rely on prim numbers because that’s how they adjust. But there is usually an on-rez script that rechecks all the prims to get their current number.
All of the above aircraft have been added to both GTFO and Kelly Shergood’s custom tail number registry. GTFO does not require any add-ons but the Shergood system does if you want a HOBBS meter or visible tail number without having to add it to your textures.
B757 by Mick McKeenan
The main focus of this article is legacy planes that were originally no-modify but have been updated to be modifiable. However, I can’t publish an article about modifiable planes and GTFO without mentioning Mick McKeenan’s jewel of the air, the 757. This plane was just released a short time ago and is also both GTFO and custom tail number compatible. Like ALL McKeenan Aviation aircraft, not only is it modifiable, the owner likes to know what people are doing with his planes.
The 757 by Mick McKeenan and the DC10 by Aeon are probably the two most “profitable” airplanes in the skies for GTFO.
A word of caution on the DC10: Do not attach the GTFO hud until you are seated. And when you are ready to deliver, you will probably have to detach and reattach it. This is due to the distance of the root prim from the seated position of the pilot. It is not a bug but caused by a security “feature” imposed by Linden Labs related to protection of privacy on private parcels. This also existed on the original release of the 757, but an update was released to correct it
Here are the SLURL’s to the three plane maker’s vendors mentioned in this article:
Released on Friday February 3, the most recent creation by Mick McKeenan, the BAe-146, fills a void that has long existed in SL Passenger Aviation: a well built, reliable and fun to fly short to mid range commuter aircraft. While there are two other planes of similar size and class (Husky/Laminar CRJ-700 and EG ATX-72), these two craft never really reached the potential they should have due to multiple issues.
I was fortunate enough to be online when the release was announced and immediately headed over to Mick McKeenan’s Hangar at Delchdork Airport to collect one. It was clear from the moment I arrived that there were more than a dozen anxious pilots picking up their Release Day copy. As I write this article just four days later, I’ve observed that the BAe-146 has almost dominated the SL skies, not to mention the Passengers of SL group, with flight announcements.
Whether you are just starting out in SL piloting, or a seasoned passenger pilot, this plane, with its adjustable levels of difficulty in flight, has something for you.
McKeenan Aviation has struck SL gold with this one.
What You Get
The delivery folder includes all the basics needed to get started:
The airplane (of course)
A choice between two huds
Very well done User Manual
A welcome note from the creator
Notecard with a link to download texture templates in PSD form
In the plane
Rezzable pushback tug
Stairs for the front and rear left doors
10 preset paint options
The plane has a very solid design and appearance. Owners of Mick’s first plane the 727, are aware that there were LOD issues with it. The BAe-146 does not have that issue. The doors degrade very slightly at the first LOD point, but it is barely noticeable and the shine actually masks it for the most part. The detail of the plane, both inside and out is excellent.
As with all planes that I review, the plane has a modifiable air frame.
All four doors on the plane open and close and stairs can be rezzed from the left side doors using a menu. Right side doors do not have rezzable stairs. In typical aircraft, right side doors are intended for service vehicles so this should not be a concern. Particularly since with most SL airplanes the right side doors don’t work.
The plane also features a rezzable pushback tug. This tug is not drive-able. It simply simulates push back when the plane is put into “reverse”.
Inside the plane, the seating is very high quality in both mesh design and texturing. The plane is filled with nicely detailed signage to add to the realistic appearance where it counts. Typically unused areas such as the galley have limited detail in clear deference to reduction of land impact.
One of the points where some people will criticize is on the flight deck console. This console was designed for usability rather than realism. There may be some disagreement on this, I will cover why I prefer the usability choice later in the article.
The plane was designed to allow for a co-pilot, however, this feature is currently broken. As Mick has a reputation for being very customer oriented, I am confident a fix will be forthcoming soon so this should not be a concern for long.
Once you have the plane rezzed, and have read the very thorough user manual, you will most certainly want to get this plane flying. The first order of business in doing this is of course to attach the hud.
There are a few functions that only work from the menu. While the plane is rezzed and not in use, the owner can access the menu by clicking on the nose of the plane. However, once seated you need the HUD to get to the menu. Shown to the right is the smaller version of the hud. The only difference between the huds is the larger one has an inset where the mini map can be displayed as an overlay to save screen space.
Note that the data displayed on the hud is based on the avatar orientation, not the airplane (as is the case with most airplane huds in SL unfortunately). The hud is designed to hide itself when the avatar enters mouselook mode. This can be disabled by hitting the “Set” button and selecting “Hide Off”. Although the hud is really not useful in mouselook mode, one might want to turn off hide because when exiting mouselook there is a noticeable delay before the hud becomes visible again.
Adjusting the Seat
Once you have the hud attached and are seated in the pilot seat, you may find you need to do some adjusting. This is particularly important if you have a tall avatar. Be very sure to check your ability to see out in mouselook mode. You may find yourself looking above the windshield. The pilot seat is adjustable from the menu.
However, I did discover that while the pilot does move with the seat while it is adjusting, the changed setting does not seem to stick after unseating. I’ve reported this issue as a bug. The fix, if you encounter this, is to adjust your hover height from the quick preferences menu.The co-pilot seat is independently adjustable by clicking on it.
This topic warrants special discussion. As indicated above, there are two things about this airplane that deviate from what some enthusiasts will refer to as realism, both related to flight instruments:
The dials on the panel are very large
They use SL measurements instead of a simulated “real flight” measure.
I put both of these items in the “positive” column. The enlarged instrument sizes make them very easy to read, which makes them actually functional. This is actually the first plane that I am 100% comfortable flying in mouselook mode because of the ease of reading the instruments. The below view illustrates what the captain will see while in mouselook mode. These are the most useful instruments of any plane I’ve seen in SL. In this case, functionality wins over realism and rightly so.
The use of actual SL measurements for speed and altitude also make it much easier to know where you are at and where you are going. While it might sound cool to say we’re flying at 115 knots, the fact is if you tried to fly at 115 scale SL knots you would not survive the first sim crossing. Typical airplanes in SL fly between 20 and 35 knots. Anything above 40 is sim crossing suicide. And when you are at 175 SL meters, thats what the instruments tell you.
The instruments may not be “realistic” but they are functional and useful because they give real information.
Flying the Plane
There are three different adjustments that can be made to the flight mode:
The plane also features auto-configuration settings for Landing, Takeoff and Landing. These configuration settings are optional as all can be done manually as well.These features will likely be abandoned quickly by experienced pilots, but are helpful for beginners.
Upon takeoff, gears and flaps automatically retract. Experienced pilots may not be fond of this. But for the most part, it happens late enough in the process that it can also be done manually.
A couple quick recommendations:
Always disable auto-leveling before take-off (AL Off on the HUD or command “ao”). Otherwise you will be fighting the auto-leveling all the way to altitude. Once you get to your desired altitude, level the plane and set the plane to Low AL (command “al”) (or High AL [command “ah”] if you like it better).
If you like flying in mouselook mode, you should take some time to adjust the HUD’s built in Octocam settings #1 and #6. These are the two most useful for most flight operations. #1 puts your non-mouselook view inside the cockpit and only one mouse-wheel move away from mouselook mode when you need to drop out to adjust something. #6 puts you in arcade mode with your camera behind the plane. Both modes, however, will need adjusting to fit your liking. The modes are saved and stick as long as you attach the same version of the hud from inventory.
I strongly recommend using the Airport Waypoint – HSI HUD created by Yetius (a.k.a. Kaliska) with this plane, especially for beginners. This will make the most challenging part of flying any plane (landing the plane) much easier for new pilots).
In the real world, passenger planes are intended for as smooth a flight experience as can be achieved. This means limiting pitch and roll. Big jets have a wide turning radius and a smooth and usually fairly long descent rate. Mick has gone to great lengths to make this plane easy to fly smoothly for newer pilots, while allowing most of these flight controls to be turned off for pilots that are more experienced and want a challenge.
One very key difference in this plane vs others in SL is that beyond climb-out, vertical speed of the plane is designed to be controlled mostly with the throttle. Throttle down the plane, the speed slows and the plane begins to drop. Throttle down/slow down too much the plane will stall and eventually crash. Throttle up and the decent will slow to zero.
Extending flaps increases the lift and drag on the plane, allowing it to fly at slower speeds needed for landing. Contrary to the design of the most widely used passenger planes in SL, which begin to drop significantly when flaps are extended, this plane does what flaps are supposed to do, which is let it stay in the air at slower speeds to allow for a gradual descent and a safe stopping distance on the runway.
When landing this plane, if the automation features are in their default settings (enhanced steering, autolevel on), even a beginning pilot should have an easy time getting the plane safely on the ground. Get lined up with the runway, at about 80-100 meters above the runway from 2.5 to three sims out with gear and flaps extended, and you should be able to smoothly land the plane by controlling the throttle and watching the altitude with great ease. Using the Airport Waypoint – HSI HUD referred to above in combination with these guidelines, will make this plane a joy to fly and land.
Much of the automation can be disabled for more experienced pilots that crave the challenge. But be warned: If you land the plane at a bad angle, it will “crash” which is to say it will derez out from under you leaving you and your passengers standing on an empty runway. Not a “feature” I am fond of. I suspect airport managers would prefer that to a more realistic crash and burn scenario. Pilots and emergency services RPers would probably prefer the latter, but in SL that probably would not work out well.
Pilot crash recovery. Plane detects a lack of input from the pilot for over 80 seconds and freezes, assuming the pilot crashes. It then sends a landmark to the pilot allowing them to return to the plane and regain control. Plane derezzes after 10 minutes if the pilot does not return.
Dynamic flight choices. Many options for how the plane perform are controllable from the hud.
Built in Octocam camera hud. The airplane HUD includes a mini version of the Octocam hud, allowing several adjustments to be made to the pilot view, giving a wide choice for different flight deck views.
All cabin doors functional.
Fully readable instrument panel.
Use of Second Life speed and measurements, rather than attempted “realistic” scales.
10 liveries selectable from the menu. In addition, there are already four pages of third party liveries on the marketplace.
Features Some Might Not Like
Uses owner say instead of whisper to communicate with the pilot. While this reduces chatter, it means the copilot does not receive the feedback.Further testing demonstrated this to be incorrect.
Auto retraction of gears and flaps cannot be disabled. You can usually get it done before the plane does it for you though.
Take off mode probably should activate landing light.
Doors and stairs cannot be controlled by chat command.
Cabin lighting only works with advanced lighting and is not really adequate even then. Admittedly though most pilots I know never bother with the cabin lights.
Camera view can’t be switched by command.
Switching control to and from copilot cannot be switched by command. Though the copilot feature is pretty much non-working, once it is fixed it should be command switchable by the pilot.
Plane is totally non-responsive to copilot unless control is switched. Lights and doors should be controllable by either crew member.
Most of the above items have been reported to Mick and as always he is extremely positive to feedback from his customers.
There are a few issues with the initial release. All have been reported and are in process of correction:
Copiloting the plane is currently not working as it should. While control can be given to a co-pilot, there are issues with the menu communication as well as lack of a hud that can be transferred to the copilot. Note: the latter is likely due to the incorporation of the Octocam in the hud, which Mick also sells as a separate hud. Most likely a transferable copilot hud will come out that does not include the octocam.
On occasion, a sound loop from either the door gong or the flap movement starts happening. Mick has indicated that this typically only happens in Firestorm. Others have reported this sporadically occurring in other planes as well when using Firestorm.
Seat adjustments. Pilot and copilot seats feature adjustments for different avatar size. However the seating position of the pilot does not change. To work around this, you will need to set your hover height to a position that will compensate. For me, that position is -0.28. Expect this to be corrected.
This is an extremely well done aircraft with top notch textures, a design that succeeds in balancing detail with land impact and a flight engine that has something for both novice and experienced pilots. It handles sim crossings better than most planes in SL.
It has high visibility, proving that it has quickly become popular among independent pilots and airlines alike. It fills the void of a short to mid-range commuter class aircraft.
The creator has a solid reputation in SL and has demonstrated reliable customer care and responsiveness.
Merry Christmas, happy Hanukkah, joyful season, whatever happy season greeting you prefer, I hope all are having some family time as this year comes to a close.
RL work and the crankiness that the Windows 10 anniversary update caused to my SL experience have hampered my ability to write here the last few months. Both problems are hopefully resolved and I have a plan for a couple of new topics coming up.
A couple of new passenger planes have been released although the only one I have recently purchased that qualifies for my review standards (must be modifiable and look and fly decently enough for me to actually want to buy it) is the DSA Pacehawk. There are a few others that have been in the works for a long time that are on my potential wish list (Laminar’s Falcon, Christi Charron’s Skylane, DSA’s Stratos Hawk and a couple others that I’m not at liberty to mention).
Modifiable Airframe Observation
As most of my readers are aware, I am very adamant about the importance of modifiable airframes for non-combat aircraft. After doing some looking through Marketplace, I’ve happily observed that the tide is turning. Of what I would call the “mainstream” aircraft designers, there are more in the modify column than the no modify, and two that have “dipped their toes” into modify waters. Aeon Voom now has one, the C-130 and Erick Gregan now has two, his flagship ATX-72 and the Cessna 421. I’m sure I have not covered them all but I know Dani, ABE&W and Shana Carpool still seem to remain firmly in the no-modify camp with no indicators of that changing.
My hope is that Aeon and Erick find that allowing modify on these airplanes did not cause their content to be stolen, or their airplanes to be turned into flying ugly sticks and roll out the modify flag to the rest of their legacy non-combat aircraft. This would go a long way in putting pressure on the few remaining holdouts.
Note: in prior articles I did not address the question of combat aircraft. For purposes of balance, there is good reason for combat aircraft to be no-modify. my discussions on modify relate to civilian aircraft primarily, and non-combatant military craft (freighters).
Calming of the Waters
SL Aviation group continues to have some occasional drama, but the changes made to management there have done wonders to soothe the old arguments. An innocent new member can inquire about one of the more controversial builders without getting their heads bit off. For the most part, they just get referred to the appropriate group and everyone goes on talking about more healthy aviation related topics. So great progress there.
With that, I wish everyone a happy and prosperous new year!
So you are flying along peacefully with a plane load of enthusiastic passengers and next without warning you find yourself watching the virtual daisies growing in your front yard and your unsuspecting passengers are scattered about who knows where. It’s probably happened to all pilots at one time or another and is a big reason that what few landlocked airports exist in SL are more museums than active airports.
Or maybe you received a 20 second warning, cranked up the juice and got out of there safely and continued on your merry way. Certainly 20-30 seconds is enough to escape anything other than a full sim parcel right?
So the question comes to mind, do you feel abused by the above? Certainly the second scenario at least gives you a chance to escape the wrath of the security orb and politely leave the parcel. The first one not so much.
So lets start with a few facts:
Common ban lines, that is those that do not specify a named avatar, extend to a maximum of 50m above the land.
A named avatar ban extends to the maximum rezzing height.
A security orb has the option of kicking you off the parcel or forcing a teleport home.
Starting with point 1, common bans (group access and access list based restriction) was clearly designed to allow uninterrupted overflight. Were this not the case, these types of bans would be total (i.e. maximum height).
A ban on a specific person extends up to the maximum effective height. These types of bans are needed to deal with griefers and other specific unwelcome guests. Not at all intended to ban the general population from overflight.
This is where security orbs come in. A security orb has little value within 50m of the land since general population ban is effective at that level. The primary function of a security orb then is to build a gap between what Linden Labs intended by setting the maximum common ban to 50m vs what the land owner desires for privacy.
The overarching question here is, does this constitute abuse? On the surface, the answer seems to be a cut and dried “yes”. But not so fast. A quick review of the knowledge base reveals a degree of tolerance for scripted tools for access management (a.k.a. “orbs”) (Ref: SL Knowledge Base: Managing Your Parcel:
You can use scripted objects to enhance your land ownership tools. Generally, such scripts should:
Provide adequate warning to the undesired Resident.
Only work within the property lines (this includes projectiles that cannot operate beyond the parcel boundaries).
Not be excessive in the removal of the unwanted Resident. Pushing an avatar off the property or teleporting them home is generally acceptable; intentionally applying a script to disrupt someone’s Second Life connection or online status is not allowed.
Scripts or no scripts, you cannot use land ownership as a way to unfairly restrict another Second Life Resident’s personal freedoms.
Like or no like, this block in an official publication clearly condones the use of security orbs and does not restrict their use by height. So we are stuck with them.
However please note the first bullet point. This text clearly calls to “Provide adequate warning…”. Combining this with the third point, while use of security orbs is acceptable, there is an expectation of reasonable usage without malicious intent.
That said, I submit that zero-warning security orbs ARE abusive. This clearly violates the intent of the above knowledge base article. Anything short of sufficient time for the avatar to clear the airspace affected in a reasonable amount of time should constitute a reportable abuse and this entry in the knowledge base supports that.
There are of course two problems. First, obviously an actual abuse report isn’t likely to bring much attention in this case. Simply put, LL is a big company and you are a small fish. Should anyone decide to pursue this matter, be sure to have the above reference handy.
Second problem is, these orbs don’t exactly make it easy to identify the owner. Once they hit you, you cannot gain any insight to the land to find out the responsible person. The best workaround to that is to go back the next day to a nearby parcel and do a land view without entering the offending parcel. The thing is, most of these orbs set a timed ban of a couple of hours. This is to avoid filling up their ban list. Once that ban is cleared, you will be able to extract information on the parcel without actually entering the parcel and getting tossed again.
Unfortunately, the previously referenced knowledge base article specifically condones the use of llTeleportHome with security orbs. While this command has its place on private estates, it is and has been for years my opinion that this function should be disabled on mainland regions. Its use alone in my view violates the spirit of the opening line of bullet point three and the final paragraph of the knowledge reference.
On a private estate, there is simply no place to send an unwanted avatar except home. But for mainland, the powers of an orb to thoroughly disrupt someone’s activities and travels clearly conflicts with the spirit of the overall statement.
In closing, here are my conclusions for what they are worth:
Security orbs with sufficient warning to clear the area are not abusive.
Zero warning security orbs are abusive.
Orbs that force teleport home are not abusive but should be.
Sadly security orbs are here to stay and there is no getting rid of them. But it would be great if we could see the end of llTeleportHome.
Up to this point, my column has been directed mostly toward pilots and crew in the aviation field. Today, I’m talking to the people that are one of the key reasons aviation gaming enthusiasts chose flying in Second Life over one of the many more realistic flight simulation systems: you, the passenger.
As pilots, we know it is hardly arguable that we can get a more realistic flight experience on the flight deck of an FSX-Steam 737 or King Air 90 than a D-737 or a DSA King Air 90. So what is it that brings pilots that want to fly passenger planes to SL rather than FSX? For most pilots I know, it is the passenger interaction. With that missing, most SL pilots start wandering back to FSX and X-Plane because if they are going to fly an empty plane, it might as well be one in a more real feel environment than SL can offer.
So with this introduction, I’m opening the door to you, the potential passenger. What is it that you want? What excites you or would excite you about hopping on to the next announced flight in Passengers Of SL?
It stands to reason that after a while, just hopping a plane and sitting from point a to point b can lose its allure after a few times. Some pilots have taken to offering better information about specific destinations or connections to other services.
In my own flights I have experienced two in-flight emergencies which my passengers seemed to be thrilled with. They were not made up. One was due to a real loss of aircraft control due to a scripting bug and the other was a sim crossing where I lost the plane and one of my passengers TP’ed me back to the plane after it crashed on someone’s house. In both cases, emergency calls were sent to various coast guard organizations which resulted in emergency responses either at the airport, or an actual aerial rescue of stranded passengers.
This article is meant to generate discussion so the meat of the article is short. This is your chance to tell the pilots and airlines in SL what YOU want. Please feel free to comment below! Pilots and crew, please feel free to chime in with ideas and constructive responses.
As a final note to passengers, have you considered joining an airline? Most airlines would welcome new members. You do not have to be a pilot. Flight and ground crews are in short supply on almost all of the airlines. Don’t be afraid to ask your pilot or crew member about that if the interest is there.
The S92 Executive Helicopter by Shergood Aviation has been out for a few months. Since its release, it has already had two updates, each adding new features that made it even better than the original. The best way to summarize the S92 is that it is a serious game changer for helicopter enthusiasts in SecondLife®. Having watched this craft evolve through its later beta stages, I can tell you it was a labor of love on Kelly Shergood’s part. The attention to detail that was put into building this craft continues to amaze everyone that sees or flies it.
What You Get
The package is a well put together pack containing everything you need to get started with flying the copter:
Five note cards of documentation and a link to the texture files
SA – KellyFuel. A refueling station designed for Shergood aircraft.
SA – S/H-92 HUD. A full hud that shows and can control the cyclic and collective and a panel that can be switched to one of four different display options
SA – S/H-92 MiniHUD. Similar to the above but without the extra display panel
SA – S92 Paint Applier
S92 Gestures. A small gesture pack with the basics
SA – S92. The helicopter
The helicopter is delivered with a modifiable airframe. As most every reader of my column knows, I consider this a critical feature. I no longer purchase or review aircraft that do not have modifiable airframes.
The S92 is fully loaded with just about every feature you can imagine and a few you probably never imagined would show up in SL. The feature load is one of several reasons it has been out for so long before I felt I could write up a fair review.
Of course it has pretty much everything you would expect a helicopter to have. In that light, I’ll stick with just the major items, and the things that make the S92 stand out from the rest.
The S92 is a glass cockpit configuration. It include five changeable display panels. There are actually only four options for the panels. But as you can see from the picture, there are two intended for the pilot, two for the co-pilot and one centered. The buttons across the top of each glass panel are working selector buttons.
On the upper panel, pretty much every switch is movable. Not all of them have actual functions beyond RP. Hard core aviation enthusiasts will, however, appreciate the presence of things like de-icing systems.
Every switch can also be controlled with chat commands. So if you don’t want to cam around to find the switches but still want to run the procedures, you can set up gestures to control pretty much anything you want.
Much of what is on the lower panel is eye candy. But some of it also has function, such as the autopilot panel.
S92 comes with two different HUDs. The mini-hud is a small panel that attaches in th lower right corner and shows the collective, cyclic and anti-torque setting, as well as the tail number and a sim crossing alert indicator.
The full hud also adds a display panel the shape of the displays in the flight deck. Like the ones on the flight deck, the display is selectable, but it’s assumed to be used for the gps display.
Unique Tail Number
Shergood Aviation maintains an aircraft registry that builders can leverage to provide unique tail numbers to aircraft. The S-92 is a part of this system. When you first rez your S-92, it is assigned a unique tail number. The tail is maintained by aircraft owner and aircraft type so once the ship is registered, it will pick up the same tail number in subsequent rezzes. However, you can save a little script time on each rez if you take the initially rezzed version back into inventory for future use. Once saved, it does not to do a phone home to the server to get it’s registration number.
You can also request a more custom tail number, within certain rules. See documentation for more details.
Note: Please see the privacy section at the end of this article for some additional details about this.
Built in GPS
Included with the S92 is a built in version of the Shergood Aviation GPS system. When your craft is active and running, it registers with the GPS system and becomes visible on the Shergood Aviation Radar Map. You also get a display map on one of the panels that shows your current position as well as other nearby pilots using the system, and registered airports and waypoints within map range.
Note: Please see the privacy section at the end of this article for some additional details about this.
Passengers ARE Free to Move About the Cabin!
The S92 has a unique feature, allowing passengers to effectively move around the cabin. A passenger can click on a specific point in the cabin, or even another seat and their avatar will get up and move to that spot. If it is a seat (including the lavatory seat!), they will then sit in that position. If it is a spot on the floor, they will move to that spot and remain standing. The passenger technically is still seated in the original seat.
You CAN Crash and Burn
If you land too hard, or hit a nearby object, your copter WILL crash and burn. If you used the standard start up procedure, it will also sound a short alarm with the Shergood ELT system and a fire suppression system will activate and extinguish the flames quickly. This feature can be disabled through the admin menu.
With release 1.2 of the S-92 came the same autopilot system that was added to the H-92, which is the Search and Rescue configuration. For pilots that are flying without a flight attendant or copilot to interact with passengers. When we talk about the flight dynamics, the reasons will become obvious.
The attention to detail in the S92 is unbelievable. Some of these items are “little things” that in and of themselves might be thought of as “fluff”. But they bring together an amazing artistry that more than justifies anything fluffy about it. Examples:
Personalized airworthiness certificate
Working fuel caps and APU plug cover.
Moderate use of advanced lighting, with glow and bright effects for users that can’t benefit from advanced lighting model.
Significant attention to detail without compromising performance significnatly.
Flying the S92
Lets get one thing out of the way now. This is not a simple helicopter to fly. All Shergood Aviation helicopters have the following warning posted clearly in the graphic:
WARNING: The flight system in this helicopter is designed for expert/advanced pilots seeking an ultra-realistic flight experience requiring practice and skill to master.
This is not an exaggeration. Do not expect to hop in this copter and fly it like a pro. You will need to work with it. But if you like a challenge, it is a fun ship to fly with characteristics about as close to realism as can be reasonably achieved in SecondLife®.
There are two official ways to start up the S92:
Detailed start. This procedure is documented in detail on the display panel. To see it, however, you need to either turn the battery on, or use the full size HUD.
Quick Start. This is a single command that runs through the startup checklist very quickly. Just type in the command qstart.
I have chosen a third less official method by creating a multi-part gesture. This gesture basically runs all of the commands in the detailed start approach, but includes delays where appropriate to allow commands to take effect and present a more realistic appearance to passengers. The shutdown gesture is basically reversing the sequence.
The S92 is an advanced mode helicopter. Balancing the collective and anti-torque in this craft will take a considerable degree of skill and practice. It is challenging but very realistic. With some patience (and a good insurance policy) you should be able to get the hang of it. The sensitivity of the controls can be switched between normal and fine as needed for different flight situations.
Using normal flight mode, do not expect to be able to interact very much with passengers. The craft needs constant attention when flying manually.
Release 1.2 of the S92 added the auto-pilot system. For pretty much everything except landing auto pilot will work out well. The demo below shows a short flight from White Star Airfield using autopilot for take off, direction and approach, ending with a manual touchdown.
The auto pilot has one issue that is probably the only thing I’m not pleased with on this copter. In fairness this may be a personal preference. The altitude is presented in feet, while all measurements in SL are based on meters. This is most likely in deference to a desire for realism, the same way that many aircraft makers use a scaled figure for airspeed. I don’t care for it in either place. While deference to realism is cool for RP purposes, when it comes to flight controls, I prefer the actual numbers needed to control the aircraft. This is one of the reasons I created my own HUD for flying. Others may respectfully disagree. Please comment on this with your preferences (scaled for realism or actual, meters or feet, etc.).
There are two things about the S92 you need to be aware of. First is the GPS referenced above. As indicated, when the S92 is powered up, it’s location is shown on the Shergood Aviation radar system. Currently this cannot be disabled. I do not see this as an issue. It is in fact more secure than having the purchased transponder attached to your avatar. When it is on the plane, then it only tracks the plane. The wearable GPS or transponder tracks you whenever you are wearing it. This is disclosed clearly in the documentation. But with the plane, once you leave the plane, you are not tracked.
Personally, I wish all pilots would use the transponder when flying. This would make for a much safer flying experience, particularly along the Bingo Strait and Coastal Waterways.
The second item to be aware of is the tail number database. Airplane tail numbers are recorded in a database which can be reviewed by registered members of the Shergood Aviation site. Once again, I and most pilots I’ve talked to see no issues with this. Other makers including Laminar use this system for tail number registration as well. If you do have issue with this, you can register on the Shergood site and change your profile to private. This removes it from visibility.
To register your account, go to Kelly’s Store at Cheerport. You will find a registration port there.
The S92 is a labor of love that Kelly Shergood has spent many hours planning and perfecting. The attention to detail in this craft is nearly unmatched in SL. While the copter does have a learning curve, it is worth it. And once you pass that curve, you may find it hard to “go back”.
You may want to consider the package with the S-92 as well as it’s sister ship, the H-92 (SAR model). They can be purchased as a discounted package if you want both.
The ATX-72 by Erick Gregan has been around for a while and has been talked about positively by several of my fellow pilots as far as flight dynamics is concerned. Until recently, I have not paid a lot of attention to this plane because of its lack of a modifiable airframe. The most recent release, however, made the version designed for end user painting to be modifiable. So, based on feedback from friends and a few other reasons I will cover shortly, I took to the skies with the airplane.
What You Get
The package comes with two editions of the basic aircraft:
Painted version. No modify. Predefined single paint choice.
Unpainted version. Modifiable airframe. Paint can be applied either by a menu with UUID’s of the textures, a drop script.
Also included is a HUD, boarding pass that is copy/transfer, a transferable personal flotation device, a small model version that can be used as an aid for painting, and an accessory pack for crew members including a flight attendant cart.
The plane includes a highly detailed flight deck with working switches and gauges. Here is a picture of the flight deck with the seats removed so you can see the entire control system.
The cabin is nicely done with more seating capacity than you would dare actually fill on an SL flight and expect to make it past the first sim crossing.
The plane has a self serving step door in the back for passengers and a working cargo compartment door. When the cargo door is opened the plane rezzes a baggage tractor/train and displays luggage in the compartment.
The hud is well done, and fully featured. It include all of the basic quick controls needed to operate the aircraft for those that prefer the easy operation mode where the plane does a lot of the “work” for you. It also includes a limited use version of the Shergood Aviation GPS/Waypoint system built into both the HUD and the flight deck display.
The plane comes with several note cards of documents in both English and French including:
Primary user manual
Shergood transponder manual
Boarding pass instructions
Where the manual leaves off, there are some videos on youtube that will help further demonstrate the general operation.
Note: Erick’s videos on this plane are not publicly listed so I will not share them. Please do not post them in the comments. If Erick chooses to do so he is welcome to.
Flying the Plane
Pilots that like a lot of clicky procedures (yes many do) will love this plane. It’s basic start up procedure is actually a bit complicated. There are some functions that are essentially nothing but role play and have no actual effect on aircraft operation. But I’m told that if you use the detailed start up procedure, you need to get it exactly right. The only source is the Youtube video. This gets a slight negative because it means you have to write it down from a video.
The plane also has an auto-start procedure where you just type “start” and all the little gizmos click on automatically and the plane starts up and is left in a ready to taxi state.
There are four automatic configuration modes for the plane which essentially set all of the standard settings for the appropriate modes:
These are possibly helpful for beginners. Experienced pilots will probably prefer not to use them.
The plane gives a nice powerful takeoff, smooth turns and about as good as any region crossing performance can be under normal circumstances. It has bank angle and stall alerts and in fact will stall if not operated correctly. Pilots I have talked with have not expressed issue with the overall performance of the plane.
This topic are the things about this plane that make it stand out. Some have been mentioned earlier but they are unique features, or potentially superior implementations:
Fuel system. There is no need for airport based fuel systems. The airplane rezzes a very realistic set of fuel trucks on demand which fuel the airplane simulating ground fuel storage.
Baggage cart. Cargo door opens with baggage and a small baggage train. It is not movable but it has a nice look to it.
Wearable flight attendant cart with hud. A “seated” flight attendant wearing these items can “move” through the airplane with or without the cart visible.
Built in voice safety briefings (English and French).
“Water landing” (a.k.a. crashing in the water). If you hit the water, the plane actually only partially sinks. Not so much an ongoing feature…but if you do have issues, and passengers it can allow for role playing out a bad water crash which can happen after a particularly rough region crossing. In fact, it also comes with a transferable personal flotation device you can give out.
LOD issues. The plane still has a few LOD issues. Pulling the camera back very far causes the doors to decompose slightly. There are instructions on how most viewers can be tuned to work around this. But it would be better if it was fixed.
Boarding pass system. This is a mandatory system whereby you must give each passenger a “boarding pass”, which they must wear, in order to sit on the plane. While security at big airports like Hollywood and Second Norway are its goal, as an airline pilot I see this as a solution desperately in search of a problem. It is an overkill to a rarely encountered issue. The best recommendation I can make for this is to make it optional. Allow the owner to turn it off. A less intrusive approach that would have been an actual improvement over the eject method used by most airplanes would be to make the eject save the uuid of the ejected avatar and automatically re-eject the passenger if they sit again.
First of all I applaud Erick for joining the newer generation of aircraft makers that have chosen to make their planes modifiable.
This is a great plane for just flying around SL. It is not difficult to fly, despite the LOD issues it mostly looks great. It has some very neat role play features most specifically for flight attendants since they can more personally interact with passengers by the simulated “walk” through the aircraft. This in fact was one of my motivations for restoring this plane into active Vulture service.
For use in general passenger service, however, unless you have a co-pilot or flight attendant to guide passengers while doing flight preparation, the boarding pass system will cause significant distraction and breaking of character while trying to guide unfamiliar passengers to their seats.
Getting the Plane
If you are going to purchase the plane, I recommend getting the plane from Erick’s store rather than the marketplace. Here is the Slurl: KBEG Airport and Shop